|
Post by teesquare on Sept 3, 2007 20:16:44 GMT -5
;D ;D ;D*** I NOW HAVE PICTURES I CAN E-MAIL*** ;D ;D ;D
I have a Frantom Hydraulic feed saw for sale. In very good condition. Has several blades and a sump/solids separator.
I will consider offers. I will be reasonable on this - based on the research I have done to obtain average selling price for these.
You may e-mail me directly at: toomanywords101@yahoo.com
Saw is located near Aheville, NC
Thanks,
T
|
|
|
Post by 4cornersrocks on Sept 5, 2007 0:28:46 GMT -5
Just what would the average price be on these saws anyways? ;D I don't know anything about them except that they sound very quality, but I really couldn't determine a price. -Dude
|
|
|
Post by teesquare on Sept 5, 2007 6:57:48 GMT -5
I have seen a low of $1000 for a no-name 18" saw with bad bearings, and no blade, to $1500-$1800 for name brand good condition, with a blade.
I am not looking for the maximum dollar in this. I also have several blades in various condition to go with it.
T
|
|
|
Post by 4cornersrocks on Sept 5, 2007 10:45:28 GMT -5
Cool, thanks...
_______________________________Dude
|
|
taogem
Senior Member
Posts: 33
|
Post by taogem on Sept 17, 2007 21:44:48 GMT -5
I have seen a low of $1000 for a no-name 18" saw with bad bearings, and no blade, to $1500-$1800 for name brand good condition, with a blade. I am not looking for the maximum dollar in this. I also have several blades in various condition to go with it. T What is the "rock" bottom price? Also, where are you located at, and how much does the unit weigh.
|
|
|
Post by teesquare on Sept 18, 2007 20:31:23 GMT -5
I do not know the weight, but I would guess at 250 lbs. It is located in western NC, near Asheville.
I will listen to offers. But I have all but stated what I will take for it.
Please re-read my ad, maybe that will give you some idea what to offer. Can ship...
T
|
|
taogem
Senior Member
Posts: 33
|
Post by taogem on Sept 18, 2007 20:56:10 GMT -5
Any way I could see a pic of it. I would imagine that it will be quite a job boxing it up. Maybe even have to crate it? I would imagine the shipping could be quite a bit. The shipping is what might kill the opportunity. But, I am interested. Will be buying one someplace over the next couple of weeks. Have decided it is going to be necessary to add it to my small but growing shop. Any way....., if you could post a pic, that would be great. Thank You
|
|
|
Post by teesquare on Oct 1, 2007 19:43:48 GMT -5
O.K.... Have pics - will post... If someone can explain HOW...
There is an icon for "IMAGE" when in the "post reply" page, But I cannot figure out how to transfer images from the file on my desktop into this post...
I can e-mail them though, so let me know if want to see them.
Thanks,
T
|
|
|
Post by 4cornersrocks on Oct 2, 2007 0:02:45 GMT -5
Just go to the "How to post pictures" thread in the general board, it's pretty easy and self explanatory, thanks Droobie!
|
|
|
Post by teesquare on Oct 2, 2007 6:32:23 GMT -5
Thanks - guesss literacy is under-rated.... I did not know about that thread <BLUSH>
T
|
|
|
Post by teesquare on Oct 2, 2007 7:03:46 GMT -5
Well............ I can post pics on 3 other forums I am a member of, as well as E-bay. I do not want to put this saw on there, but I may have to. If I can not make these pics transfer and appear where they are supposed to go. When I try to copy/paste, I get nothing. If I hold down left button and scroll to highlight, and then click "select all" - then I can paste the URL into the text portion of the ad. BUT it does not transfer the picture ( that I can verify), so-..... what's a mother to do?
T
|
|
|
Post by lee on Oct 2, 2007 12:23:31 GMT -5
Try using the copy and paste commands. Highlight the picture URL and hit copy, then go to you post and highlight the location where you want to put the picture and hit paste. The URL will be shown and when you hit preview you will see your picture. Finally once you hit post, your text and picture will be shown. Make sure you size your picture before you load it into Dobbie's software or you will post a picture that is too big to fit on the page.
|
|
|
Post by teesquare on Oct 2, 2007 20:17:30 GMT -5
Nope... DOES NOT work.... Again, I use Pro Boards software based forums, and am able to post pics on all of them. When trying to copy, that function is greyed out - thus in-active. Will not allow me to move the image. Oh well... If anyone is interested in this act soon. Otherwise it goes to e-bay on Friday. I can assure you I will get more for it there.
|
|
taogem
Senior Member
Posts: 33
|
Post by taogem on Oct 4, 2007 0:47:44 GMT -5
Have you tried to use regular code?
[img] url to hosted pic here [/img]
|
|
|
Post by dixieeuhedrals on Oct 4, 2007 6:42:42 GMT -5
just email me the pictures at sio2ga@yahoo.com and I will post the pictures for you
|
|
|
Post by teesquare on Oct 4, 2007 7:51:24 GMT -5
Thank you - will do right now!
T
|
|
|
Post by dixieeuhedrals on Oct 4, 2007 15:44:46 GMT -5
|
|
|
Post by dixieeuhedrals on Oct 4, 2007 15:46:06 GMT -5
|
|
|
Post by dixieeuhedrals on Oct 4, 2007 15:46:25 GMT -5
|
|
|
Post by dixieeuhedrals on Oct 4, 2007 15:46:50 GMT -5
|
|
|
Post by dixieeuhedrals on Oct 4, 2007 15:47:05 GMT -5
|
|
|
Post by dixieeuhedrals on Oct 4, 2007 15:47:26 GMT -5
|
|
|
Post by dixieeuhedrals on Oct 4, 2007 15:48:07 GMT -5
|
|
|
Post by dixieeuhedrals on Oct 4, 2007 15:48:24 GMT -5
|
|